cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1728
Views
0
Helpful
1
Replies
Highlighted
Enthusiast

One way call between IP Phones and Tandberg C60

Calls from IP Phone to Tandberg C60 works (audio only of course) but if I call from the C60 to an IP Phone, it doesnt work.  CUCM 8.0.x, VCS 5.2 and Codian 4520.  SIP trunk between the VCS and CUCM

I think if this works, it will solve my problem wherein I need the Codian MCU to dial out to an audio conference bridge in the PSTN.  Thoughts?

1 REPLY 1
Highlighted
Beginner

Can you please review and match your configuration according to this document? Hopefully this guide will help you to resolve this issue

http://www.tandberg.com/collateral/documentation/Deployment_Guides/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X5-1.pdf

Thanks
Muhammad

Content for Community-Ad