cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
215
Views
0
Helpful
5
Replies
Highlighted
Beginner

OpenLDAP and CUCM 10.5

Hi 

I have a CUCM 10.5.2.10000-5 and a OpenLDAP in my OpenLDAP I have the user created and working, when I synchronize the CUCM with the OpenLDAP directory only synchronize a few user, and only one user with all parameters, if I review and compre the users and all users have the same configuration and the same attributes.

Any idea?

Regards

fixie rider
5 REPLIES 5
Highlighted
Hall of Fame Cisco Employee

You can review the LDAP logs to see exactly why they're not being synced.

Are they all in the same OU?

HTH

java

if this helps, please rate
Highlighted

Jaime, thanks for your anwser

For the OpenLDAP side I don't see any problem. We have another device synchronize with the OpenLDAP and the can see and authenticate at all users. Also, all the user is contained in the same OU, and the CUCM is looking at main domain.

Example

User1 = Full synchronize

cn=XXXXX XXXXXXXXX,cn=ingenieria,ou=hiway,dc=hiway,dc=cl

User2 = Partial synchronize

cn=YYYYY YYYYYYYYY,cn=ingenieria,ou=hiway,dc=hiway,dc=cl

User3 = Non synchronize

cn=ZZZZZ ZZZZZZZZZ,cn=ingenieria,ou=hiway,dc=hiway,dc=cl

LDAP User Search Base: dc=hiway,dc=cl

Regards

fixie rider
Highlighted

Hi 

have you applied any filter in the LDAP synchronization on the call manager site 

Highlighted

No, I don't have any filter, also the user can see the entire tree

fixie rider
Highlighted
Hall of Fame Cisco Employee

Then you definitely need to dig into the LDAP traces to see exactly why CUCM won't sync those users.

HTH

java

if this helps, please rate