Hi,
We are having an issue with CLID when calling via PSTN network. Below is the telco log for reference unable to understand the issue.
2020-08-10 16:05:02.020370 [DEBUG] isdn_trace.c:224 [SNGISDN Q931] wp11 FRAME INCOMING:
Prot Disc:Q.931/I.451 (0x08)
Call Ref:1DBB (Originating side)
Type:SETUP (0x5)
Sending complete:
Bearer Capability:Coding:ITU-T(0) TransferCap:3.1Khz audio(16) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3)
Channel Id:No:4 Type:B-chans(3) Preferred/Implicit
Progress Indicator:coding:ITU-T(0) location:Public network, local user(2) descr:Origination address is non-ISDN(3)
Calling Party Number:09922XXXXX5(l:11) plan:isdn(1) type:national(2)scr:network, provided(3) pres:allowed(0)
Called Party Number:4876XXXX(l:8) plan:isdn(1) type:subscriber(4)
[ 08 02 1d bb 05 a1 04 03 90 90 a3 18 03 a1 83 84 1e 02 82 83 6c 0d 21 83 30 39 39 32 32 38 30 31
30 34 35 70 09 c1 34 38 37 36 33 32 37 39 ]
2020-08-10 16:05:04.460373 [DEBUG] isdn_trace.c:224 [SNGISDN Q931] wp11 FRAME INCOMING:
Prot Disc:Q.931/I.451 (0x08)
Call Ref:1DBB (Originating side)
Type:DISCONNECT (0x45)
Cause:coding:ITU-T(0) location:Public network, local user(2) val:Normal call clearing(16)
6: 0x00
[ 08 02 1d bb 45 08 06 82 90 00 00 00 00 ]
Early reply is expecting. Thanks in advance.