When I dialed "0011345T" Calls always hit the US Dial Peer (11).
I tried showing the dial plan, only the US Dial Peer shows up.
voice#show dialplan number 0011345 timeout Macro Exp.: 0011345
VoiceEncapPeer11 peer type = voice, information type = voice, description = `T6000 to ROW (US)', tag = 11, destination-pattern = `0011T', answer-address = `', preference=0, CLID Restriction = None CLID Network Number = `' CLID Second Number sent CLID Override RDNIS = disabled, source carrier-id = `', target carrier-id = `', source trunk-group-label = `', target trunk-group-label = `', numbering Type = `unknown' group = 11, Admin state is up, Operation state is up, Outbound state is up, incoming called-number = `', connections/maximum = 0/unlimited, DTMF Relay = disabled, URI classes: Destination = huntstop = disabled, in bound application associated: 'DEFAULT' out bound application associated: '' dnis-map = permission :both incoming COR list:maximum capability outgoing COR list:minimum requirement Translation profile (Incoming): Translation profile (Outgoing): incoming call blocking: translation-profile = `' disconnect-cause = `no-service' advertise 0x40 capacity_update_timer 25 addrFamily 4 oldAddrFamily 4 type = pots, prefix = `', forward-digits all session-target = `', voice-port = `3/0:D', direct-inward-dial = disabled, digit_strip = enabled, register E.164 number with H323 GK and/or SIP Registrar = TRUE fax rate = system, payload size = 20 bytes supported-language = ''
Time elapsed since last clearing of voice call statistics never Connect Time = 3427550, Charged Units = 0, Successful Calls = 84, Failed Calls = 140, Incomplete Calls = 1 Accepted Calls = 0, Refused Calls = 0, Last Disconnect Cause is "10 ", Last Disconnect Text is "normal call clearing (16)", Last Setup Time = 421421030.
No other dial peer shows on the dialplan even though it should check on the longest matched digit right?