cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
784
Views
10
Helpful
3
Replies

Outgoing call fail via sip trunk

min ko
Level 1
Level 1

Hello Sir,

   

Good morning to you all.I would like to ask you to some question about outgoing call fail via sip trunk.We have 2 BE7K and last week we setup direct SIP trunk from CUCM to ITSP. SIP Trunk from CUCM and ITSP's SIP Proxy is connected and service is up.When we make outgoing call,call is rejected.Could I get your support to solve this issue? Following is setup diagram.

1 Accepted Solution

Accepted Solutions

tgaur
Cisco Employee
Cisco Employee

hi,

 

as you mentioned the trunk is up, have you checked the reason of disconnect.

 

collect the CCM logs for one test call.

View solution in original post

3 Replies 3

tgaur
Cisco Employee
Cisco Employee

hi,

 

as you mentioned the trunk is up, have you checked the reason of disconnect.

 

collect the CCM logs for one test call.

Dear Tgaur,

 

I have collected the CCM logs for on test call.

called number : 90067718
calling number: 2222
start time : 11:00 am
end time : 11.02 am
call flow : 2222 extension call access code 6 follow by external phone number 90067718

issue : call setup fail. 

 

 

hi,

 

i checked the logs and found 202.163.63.213 is replying with 403 forbidden message, for the invite message.

 

best is to check with the person managing 202.163.63.213 and understand why this is happening.

 

for your reference you can share the invite with "Call-ID: cdc9d000-c9017089-53e3b-a0b10ac@172.16.11.10" to them.

 

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: