PagePac Plus D100 Amplicenter and Cisco 2921

[phongbinh]

Good day everyone.

I have the Lucent Pagepac Plus Amplicenter D100 and now wants to connect that to our new Cisco phone system as well as the Cisco 2921 router.  So which port, FXO or FXS, will I be connecting to enable the D100 to work with the Cisco 2921?

[Chester Rieman]

From google, it looks like the pagepac has FXS ports which can be either loop or ground start - you would need an FXO port to connect to it.

Hope this helps.