PAP2T - Number accepted that does not match the dial plan
While testing my dial plan on the PAP2T, I encountered a number that was being accepted that shouldn't have been, as there is no matching rule in the dial plan. I simplified the dial plan and have narrowed it down. Here is an example dial plan: (xxxxxxxxxx). My understanding is that this dial plan will allow any 10 digit number and will reject everything else. However, if I dial 101 (for example), the call is still placed after a few seconds (101# is completed immediately).
My understanding of the rule is supported by the following example in the documentation:
9, <:1>[2-9]xxxxxxxxx This example is useful where a local area code is required.
After a user presses 9, an external dial tone sounds. The user must enter a 10-
digit number that begins with a digit 2 through 9.
I changed the dial plan to the following, just to see what would happen: (*xx). This should allow asterisk and any two digit code. I tested 101 again, and got a busy signal right after I pressed 1. This is working as expected.
I also tried the following dial plan: (xx). When I dial 101, I get a busy signal after I dial the third digit, as expected.
Why is the device allowing 101 with a dial plan of (xxxxxxxxxx)? It appears that this dial plan will allow any number between 1 and 10 digits.
When talking about Dial Plan and Digit Manipulation Cisco Unified Communication Manager, three components play an important roles to perform the transformation of the calling and called parties.The Translation Pattern, Transformation Pattern and Rou...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling connec...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling ...
Learn about the All New Webex Events. Listen: https://smarturl.it/CCRS8E29 Follow us: https://twitter.com/ciscochampion The new Webex Events transforms your company meetings and corporate events with real-time online webinars and webc...
I noticed that this part of Cisco Meeting Server Implementation Certificate Requirement is not enough detailed in many documentations and videos. Understanding this part of Certificate Requirement is mandatory to set up the Cisco Meeting Server and config...