cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3246
Views
10
Helpful
5
Replies

password for uc500

hi folks,

i am not able to log into UC500 box.

the manual says i should get the DHCP when connected to box .but i am not getting

can somebody tell me what is the default password for UC500 box.

or how to set it to default value.

or password recovery.

thx for ur consideration.

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Connect via serial cable to console port. As the banner indicates, the default is cisco/cisco.

Hope this helps, please rate post if it does!

thx but its not working.

cisco/cisco is not working somebody might have changed it. i am working in my lab on this box.

any password recovery.

Apply the standard router password recovery:

http://cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml

hope this helps, please rate post if it does!

As I recall, I think the default username / password for my UC520 was:

username: Cisco

password: Cisco

(Note the C is upper case)

How do I find the IP address for CCA

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: