11-25-2012 01:54 AM - edited 03-16-2019 02:22 PM
Hello,
We have a publisher and a subscriber in different subnets.
Phones in far offices register to the subscriber but they don't take the new firmware.
If we change the tftp address on those phones to point to publisher they successfully upgrade.
What could be the reason?
Thanks,
Solved! Go to Solution.
11-25-2012 02:00 AM
Hi Essam,
Several questions to come to mind based on what you described:
++ Did you upload the firmware on the Subscriber? The firmware files are not replicated via dbreplication and they need to be uploaded to each node which has the TFTP service running.
++ What firmware are you trying to install, what is defined in the device defaults page and what is the existing firmware on the phones?
++ What phone models are you doing this for?
++ Is there any firewall between the remote site and the Subscriber?
Regards,
Harmit.
11-25-2012 02:00 AM
Hi Essam,
Several questions to come to mind based on what you described:
++ Did you upload the firmware on the Subscriber? The firmware files are not replicated via dbreplication and they need to be uploaded to each node which has the TFTP service running.
++ What firmware are you trying to install, what is defined in the device defaults page and what is the existing firmware on the phones?
++ What phone models are you doing this for?
++ Is there any firewall between the remote site and the Subscriber?
Regards,
Harmit.
11-27-2012 09:16 PM
Thanks Harmit,
I uploaded the fw on the subscriber and that worked.
Thanks alot.
11-27-2012 09:30 PM
My pleasure Essam, glad to know it's all sorted out now :-) See you around.
Regards,
Harmit.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: