cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

284
Views
15
Helpful
6
Replies
Highlighted
Beginner

Phone registration

Hi all,

 

I have my two cucm 1 pub and 1 sub, each on different sites, because of bandwidth limitation, i want my phone that is in the same site as the pub register to the pub , and all the phones that are in the same site as the sub register to the sub.

 

I know this is not the best practices but I need to fix this network limitation.

 

thanks. 

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Rising star

Re: Phone registration

First, you will need to create 2 different CUCM Groups, on the first one you will have on the "Selected CUCM List"  the Pub on the top and on the second you will have the Sub on the Top. This way the phones on the first Group will look first to register on the pub and then on the Sub and opposite.

Then, you will need to create 2 Device Pools where on each one -amongst others- you will need to denote the above CUCM Groups (device pool-1 CUCMGroupPub, device pool-2 CUCMGroupSub). 

Finally, you will need to assign each phone on the Device Pool, based on the Group of CUCM that belongs to.

I hope the above helps,

G

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

View solution in original post

6 REPLIES 6
Highlighted
Beginner

Re: Phone registration

You can achieve this easily by using device pools and call manager groups.

Highlighted
VIP Rising star

Re: Phone registration

First, you will need to create 2 different CUCM Groups, on the first one you will have on the "Selected CUCM List"  the Pub on the top and on the second you will have the Sub on the Top. This way the phones on the first Group will look first to register on the pub and then on the Sub and opposite.

Then, you will need to create 2 Device Pools where on each one -amongst others- you will need to denote the above CUCM Groups (device pool-1 CUCMGroupPub, device pool-2 CUCMGroupSub). 

Finally, you will need to assign each phone on the Device Pool, based on the Group of CUCM that belongs to.

I hope the above helps,

G

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

View solution in original post

Highlighted
Beginner

Re: Phone registration


Hello,

 

Thanks for the info one more question is this a good practice ?

 

thanks. 

Highlighted
VIP Rising star

Re: Phone registration

Ideally, you will not face any problems as long as you are able to enable QoS between the 2 sites, in order to make sure that Voice packets will get prioritised compared to the rest traffic.

G

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies
Highlighted
Beginner

Re: Phone registration

If possible another option for good practice would be installing another SUB at the location where the PUB is and registering phones to that SUB instead of the PUB.

Highlighted
VIP Rising star

Re: Phone registration

Yes, this is the best practice scenario

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey