Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am unable to get a sectera viper phone to register with call manager. I have it built as a common 7960 sccp phone profile. When it boots up it will pull an IP address but will not register. This is my first time working with one of these phones and...
My org has a single CUCM cluster with around 10k phones registered across 100+ buildings. We've been semi-regularly experiencing an issue that we've had trouble tracking down. Due to the nature of our deployment and the intermittent/difficult to repr...
We are trying to accommodate an employee with hearing impairment so that they can use a TTY Display AND there is a compliance need for call recording. Has anyone been able to overcome this obstacle? We are running up against the inability for Call ...
Hi, I have a customer on CUCM 12.5(1)SU4. They use Call Pickup groups fairly extensively but have started having problems with some of them recently after phones were moved between offices. One CPG has two phones (User Device Profiles logged into 784...
Hello,we are stilll using a isr2900 router as a SBC.Currently it uses the securityk9 license and a uck9-cme-srst-cube license as smart licensing.The logging output tells me that the evalution period already expired.I know the product is EOL/EOS but s...
Our old work phones would take turns around the room. I don't think it was called hunt group, but once logged in to your group/extension...it would go around the room on whose turn it was to answer. Is there a way to do that? Thanks
HI, we have project requirement to integrate the Iridium Satellite phone integration with Cisco PABX to make a calls in case of emergency. Can you please suggest, what can we achieved with this interface.1) can we make calls on any number at cisco PA...
Does anyone know of a Cisco VOIP phone that supports direct fiber connection from phone to switch?
Hey,I have a CUCM 12.5 install that is running on evaluation. Whenever I place a call from one internal phone to a different one, hold music works just fine with my announcements and everything. But as soon as I place a call from the PSTN it just goe...
I have a DID I need to route to three different groups, receptionists during the day, medical staff for the evening, and an answering service after hours.The only option I can think of that has a schedule associated with it is a System Call Handler a...
Hi everyone! We have a problem with a call transfer.The structure is simple: My part ((Voip Tlf---->CUCM---->SBC))---->their part---((SBC---->CUCM---->TLF VOIPWhen we transfer an internal call (between 2 phones registered in our CUCM) there isn´t any...
Why do some of my calls get sent to Cisco Unity messaging system default mailbox instead of my personal mailbox?
Dears.I Have Avaya K175 configured as SIP on Cisco Call Manager.the phone keeps disconnecting every 2- 3 minutes.I can make calls from Avaya phone to Cisco phones. but Avaya is not receiving from Cisco " gives busy tone".I checked Cisco & Avaya logs ...
There may not be a "Best" strategy for adding a 9 when dialing out.I want to set up a fax machine so that any time the user sends a fax, they don't have to dial a "9"I thought I read that PLAR could do this in a Translation Pattern.I'm having trouble...
I’m trying to deploy a DECT IP network using Cisco Unified Communications Manager (CUCM).“CUCM” is essentially just a Cisco PBX and “DECT” is just a protocol for handsets to communicate with base stations.I think I found a limitation in CUCM.Basicall...
