PLAR in a vg204 box

[Niels Kaae]

I have a standard vg204 box runing sccp.

i have connected at analog phone to port 0/0 and configured that port in cucm. Analog phone op port 0/0 number 222 is to call IP phone 952 when picked up. It works as expected.

BUT when i hang up on my IP phone the damn thing keeps ringning untill i hang up the analog phone. I understand why it does that but how can i stop it from ringing?

I want the IP phone to send a disconnect to the analog phone.

regards

Niels

[Steven Holl]

I can't get a tone generated on MGCP or SCCP when PLAR is configured.

With H323/SIP, though, I am able to.  Use:

voice-port
no battery-reversal
timeouts call-disconnect 1
timeouts wait-release 1
connection plar

When those timers pop it will play a disconnect tone to the handset.  You may have to use the cptone configurations to change these frequencies to match what your device is looking for.

[Rob Huffman]

Hi Steven,

I'm always stoked to see someone take the time to lab something up to

verify an answer here +5 for this great work my friend!

Cheers!

Rob