PLEASE help! I need to setup SIP inbound to hunt group
I have my SIP outbound working just fine. But for the life of me, I cannot get SIP inbound working. I have tride
voice translation-rule 1
rule 1 /6069487364/ /1000/
To put the number directly on the phone and it does not work. So I thought I would assing the SIP DID (I have just one DID) to a hunt group. That am I doing wrong???? I have spent days to get incoming calls to work. I can't really be this hard can it?
Attached is my current sh run results. Below is a debug voip dial-peer result from when I place a call to my SIP number from my cell phone.
Cell Number 3525381577
SIP DID 2055369199
SIP Called-numbe 6069487364 (*This is my account number from my SIP provider.It shows up in the debug results below. The 205 DID does not show up.
Voice hunt-group 1 2000
At this time I DO NOT have a FXO card or any other POTS lines.
Please let me know what else you need from me to get this working so I can move forward with my CCNA Voice learning.
After lots of digging around, we found a solution.
I am running IOS 15.1-4 and there seems to be a new command in it called TRUSTED IP LIST that is turned on by defualt. I am not sure if the command is new or that is is on by defualt. Anyways, once I added the IP address (it will NOT accept a DNS address), my calls started ccoming in.
Thanks so much to Soct B at Net Cert Labs for taking the time to work with me on the phone to get this resulved!
IntroductionFeatured ExpertQ:Under what circumstances does it make sense to view "resource total" as opposed to "resource available" or vice versa?Q:Can that be sent to a Syslog server?Q:Is it possible to see when a device has changed, for example, if a ...
(view in My Videos)
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event had place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is th...
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...
To participate in this event, please use the button to ask your questions
Tour of the Real-Time Monitoring Tool
Have any questions about the Real-Time Monitoring Tool?
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to...