12-10-2008 09:06 AM - edited 03-15-2019 03:00 PM
Hello,
I have a Cisco Call manager 6.0 and i would like to khnow if i can deploy Polycom SoundPoint IP 330 IP phones with it.
Thank you for help.
Houichi Nizar
09-04-2009 09:00 AM
Hi, What do you do?
i like to do the same. Pls. see the attch. I configured for this way, but not works.
Regards.
CMP
⢠Press the Menu Button
⢠Choose (3) Settings
⢠Choose (2) Advanced
⢠Password is 456
⢠Choose (1) Admin Settings
⢠Choose (2) SIP Configuration
⢠Select Server and add the IP Address of the Cisco Call Manager©
Confirm this selection and scroll down to Line1:
⢠Enter a Display Name
⢠Add the SIP Extension that was added within the Call Manager Menu as the Address
⢠Add the SIP Extension that was selected as the Username within the Call Manager User Menu as the Auth User ID
⢠Add the 5 digit Auth Password that was selected as the PIN Entry within the Call Manager User Menu.
⢠Optional add a Label that will be displayed next to the Line Key
⢠Press exit until the Prompt comes to save the Settings and the Phone will reboot after this.
09-07-2009 03:01 AM
Also make sure that the SIP Extension you use has a User ID setup in the Owner User ID and the Digest User in the Call Manager Settings
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: