cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
732
Views
5
Helpful
5
Replies

prefixing extra numbers on dial-peers

techguy
Level 4
Level 4

Hi,

how can i add some extra digits without informing users. Lets say if users dialing 90501234567, at backend, i want to add 9088880501234567.

1 Accepted Solution

Accepted Solutions

Just change prefix 05 to 908888050, so it should look like this:

dial-peer voice 13 pots

prefix 908888050

Chris

View solution in original post

5 Replies 5

Joseph Martini
Cisco Employee
Cisco Employee

If I remember correctly this can be done using a translation pattern to add extra digits along with "no supplementary-service h225-notify cid-update" to prevent the phone display from changing.

If this is a pots dial peer you can simply add "prefix" command to the dial peer, if this is on voip dial peer you will need to use translation rule. The command Joe is referring should prevent the user from seeing the updated dialed number, though that will only work for H323 GW, if you are using SIP I would imagine you would need to add a sip profile and modify the header.

HTH,

Chris

dial-peer voice 13 pots

description Mobile

destination-pattern 905........$

port 0/0/0:15

prefix 05

where will i add? at dialpeer or in cucm (route pattern)

Just change prefix 05 to 908888050, so it should look like this:

dial-peer voice 13 pots

prefix 908888050

Chris

Thanks, it worked.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: