cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

813
Views
5
Helpful
4
Replies
Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

G'day,

Planning to upgrade our Cluster to 8.6(1a). Cluster consists of several MCS 7825-H3 (HP OEM). I noticed the following on Page 5 of Release Notes for Cisco Unified Communications Manager Release 8.6(1a):

"If you are upgrading software on HP7825H3 or HP7828H3 hardware, ensure that you have a 16GB

USB device available to migrate your data to the new system."

Does anyone know what file system type the 16GB USB device needs to be formatted with. I can confirm that NTFS does not work.

Thanks in advance.

Col

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

Hi Colan,

When following the same procedure to upgrade a cluster, do I need the external HD for both PUB and SUB? I have this question because the PUB and SUB servers are located in different cities and I like to make sure the external HD is ready if it's required for SUB as well.

Thanks.

Michael


.

View solution in original post

4 REPLIES 4
Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

Upgrade to 8.6 worked just fine once I formatted the 16GB USB device to ext2.

Now if only I could work out how to rate this answer to my own question and close the Discussion

Highlighted
Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

Hi Colan,

When following the same procedure to upgrade a cluster, do I need the external HD for both PUB and SUB? I have this question because the PUB and SUB servers are located in different cities and I like to make sure the external HD is ready if it's required for SUB as well.

Thanks.

Michael


.

View solution in original post

Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

Yes you need to have external 16GB USB device formatted as ext2 connected when you upgrade each HP7825H3 or HP7828H3.

Beginner

Prerequisites for upgrade UCM 8.6(1a) on MCS 7825-H3

Thanks Colan, +5.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here