cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
145
Views
0
Helpful
4
Replies
Highlighted
Beginner

PRI busy channles

is there a command to look at channels that are busy and is there a command under the ios to take them of busy

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Im not sure if there is a command to reset individual channels, but you can bounce the PRI as a whole by doing a shut/no shut on controller t1 x/x/x, voice-port x/x/x:23, and interface serial x/x/x:23.

Hope that helped, if so please rate.

View solution in original post

4 REPLIES 4
Highlighted
Rising star

Hello,

If you issue a "show isdn service", it will show you the status of the channels of your PRI.

Hope that helped, if so please rate.

Highlighted

thanks is there a command to reset a channels

Highlighted

Im not sure if there is a command to reset individual channels, but you can bounce the PRI as a whole by doing a shut/no shut on controller t1 x/x/x, voice-port x/x/x:23, and interface serial x/x/x:23.

Hope that helped, if so please rate.

View solution in original post

Highlighted