I am in the process of deploying a remote site with centralized CCM and Unity Connection.
My problem is that we must use the PSTN to route Voicemail, no WAN calls. That said, we have RDNIS going, and all is well, however, when I press the messages button, there is a 3 second delay before the voice channel is opened (after the call has been rerouted).
Basically, instead of hearing "Please enter your PIN, followed by #". Instead you hear, "N, followed by #"
We thought the issue was due to RDNIS; however, we hear the same exact message when just dialing the unity pilot directly, via the PSTN.
Is there a way to buffer the first few seconds of voice on the PRI when dialing this number so that the users can hear the entire message?
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...