Problem with fxo port on CME router 2811

[fxavier.cat]

Hey pros,

i have a router 2811 with cue module, and 2 cards FXO (4 ports each)

i have the configuration as follow:

voice-port 0/0/0

connection plar opx 700

caller-id enable

!

voice-port 0/0/1

connection plar opx 700

caller-id enable

!

voice-port 0/0/2

connection plar opx 700

caller-id enable

!

voice-port 0/0/3

connection plar opx 700

caller-id enable

!

voice-port 0/1/0

connection plar opx 700

caller-id enable

!

voice-port 0/1/1

connection plar opx 700

caller-id enable

!

voice-port 0/1/2

connection plar opx 700

caller-id enable

!

voice-port 0/1/3

connection plar opx 700

caller-id enable

700 is the number of my AA.

Actually i have only 4 lines connected on that.for example :

555-555-xxx1

555-555-xxx2

555-555-xxx3

555-555-xxx4

But it seems i cant pass 4 calls in same time, i hear the busy tone...

please someone can help me

thanks a lot

[Brandon Buffin]

Check the maximum sessions setup for the auto attendant in CUE.

Brandon

[fxavier.cat]

ccn application autoattendant

description "autoattendant"

enabled

maxsessions 8

script "aa.aef"

parameter "busOpenPrompt" "AABusinessOpen.wav"

parameter "holidayPrompt" "AAHolidayPrompt.wav"

parameter "busClosedPrompt" "AABusinessClosed.wav"

parameter "allowExternalTransfers" "false"

parameter "MaxRetry" "3"

parameter "operExtn" "1001"

parameter "welcomePrompt" "AAWelcome.wav"

parameter "businessSchedule" "systemschedule"

end application

[fxavier.cat]

ccn application autoattendant

description "autoattendant"

enabled

maxsessions 8

script "aa.aef"

parameter "busOpenPrompt" "AABusinessOpen.wav"

parameter "holidayPrompt" "AAHolidayPrompt.wav"

parameter "busClosedPrompt" "AABusinessClosed.wav"

parameter "allowExternalTransfers" "false"

parameter "MaxRetry" "3"

parameter "operExtn" "1001"

parameter "welcomePrompt" "AAWelcome.wav"

parameter "businessSchedule" "systemschedule"

end application

[fxavier.cat]

my maxsessions value is 8.

Do you see any other problems ?

[Brandon Buffin]

Can you post your config?

Brandon

[fxavier.cat]

ok i found my own error... :-P

thanks for help tho

my dial-peer voice x pots was incorrect.