01-26-2011 06:42 AM - edited 03-16-2019 03:05 AM
Hello,
i have a problem with a 7937 conferencingstation. The system ist a Cisco 2821 service-integrated router with CME 8.1.
On the 7937 conderencingstation, i can establish an ad-hoc conference with two phones. The Problem is to add a incoming phonecall to the conference. I tried to use the sw-key "Confrn", but then i have to dial a phonenumber, instead of adding the incoming call to the conference.
Do i have to configure something i forgot? multi ad-hoc conferencing?
01-26-2011 07:32 AM
Hi Kenjie,
That is working as designed
You have two choices here;
1. Set up the External call first before setting up the internal ad-hoc portion
or
2. Use the Select Softkey and Join Softkey to add the External call to the
existing conference as described in these two great threads;
https://supportforums.cisco.com/message/3160575#3160575
https://supportforums.cisco.com/message/2015576#2015576
Cheers!
Rob
01-27-2011 03:18 AM
Hi,
thank you for your explanation. i configured a lab with same configuration, it looks like their is a problem with ad-hoc conferencing, when an octo-line is configured on the conferencingstation. I changed it back to a dual-line and it worked fine; for three participants.
But now i have one problem, the final step would be to configure hardware conferencing. But this i will discuss in a new thread.
Thank you, you links helped me great too.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: