cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

645
Views
0
Helpful
1
Replies
Highlighted
Beginner

Problems with an ATA 187 and Siemens Gigaset A160

Hi to all,

I have one ATA registered in the CUCM, the audio is good but I have som problems with the analogue phone. I can do all necesary functions (Off-hook, on-hook, transfer, hold, etc...) but sometimes the phone stops working properly .... And I have to do a reset and all works properly again.....

I have checked all the configuration and I have searched in Cisco some configuration example but I didn't found any, all is right....... Before this phone was working with an ATA 186 and it was working right.

Any idea about????

Thanks to all!!!

David

Everyone's tags (2)
1 REPLY 1

Problems with an ATA 187 and Siemens Gigaset A160

hi David Babiano Rodriguez

Here you have a manual with instructions about your ATA 187 http://www.cisco.com/en/US/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/a187_ag.pdf

Greetings, Johnnatn Rodriguez Miranda

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards