Procedure to configure IPMA CUCM 8.5

[wilsonsant]

Hi Guys,

I need configure the IPMA in the Cisco Unified Communicatior Manager 8.5, but, I didn´t found the procedure in the Cisco Site to this version , only found procedure to version 7.1. The procedure is the same? or is there specific procedure to configure IPMA in the version 8.5?

Thanks,

Wilson

[cjoseph23 · Accepted solution]

Take a look here and see if this is what you need:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsipmasl.html

HTH,

cj