ā12-10-2010 11:44 PM - edited ā03-16-2019 02:22 AM
hi,
im trying to config T1 in PSTN router which is back to back connected to a router, but did not succedd , here is the error
msg im getting when i debug isdn q931 on PSTN & HQ Router :
HQ#BAD FRAME()BAD FRAME()BAD FRAME()BAD FRAME()
*Dec 11 08:01:07.187: ISDN Se0/0/0:23 Q931: Ux_DLRelInd: DL_REL_IND received fro
m L2
BAD FRAME()BAD FRAME()BAD FRAME()BAD FRAME()
*Dec 11 08:01:16.187: ISDN Se0/0/0:23 Q931: Ux_DLRelInd: DL_REL_IND received fro
m L2
BAD FRAME()BAD FRAME()BAD FRAME()BAD FRAME()
show isdn status on both the rotuters are same:
HQ#sh isdn status
Global ISDN Switchtype = primary-4ess
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-4ess
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x8000FFFF
Number of L2 Discards = 0, L2 Session ID = 66
Total Allocated ISDN CCBs = 0
HQ#
HQ#
HQ#
HQ#sh isdn status
Global ISDN Switchtype = primary-4ess
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-4ess
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = AWAITING_ESTABLISHMENT
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x8000FFFF
Number of L2 Discards = 0, L2 Session ID = 69
Total Allocated ISDN CCBs = 0
HQ#
HQ#
attached are the HQ & PSTN Router Config !!!
This is my first time back to back router connectivity.
Can any body suggest please ??
Regards
Solved! Go to Solution.
ā12-11-2010 09:03 AM
glad it worked. dont forget tor rate useful posts
ā12-11-2010 02:21 AM
You need to have one end providing clock and serving as the network side.
Eg on your PSTN router you will have
int s0/1/0:23
clock source internal
isdn protocol-emulate network
ā12-11-2010 08:58 AM
Hi Aokanlawon,
Thanks for your help it worked with your suggestion.
Regards,
ā12-11-2010 09:03 AM
glad it worked. dont forget tor rate useful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: