cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
261
Views
0
Helpful
1
Replies

QOS on ASR 1002

Ronit Malhotra
Level 1
Level 1

I am replacing existing router with ASR 1002 IOS  15.4(2)S, following command is not working 

random-detect dscp

"

policy-map SHAPE

  class class-default

   shape average 10000000

   random-detect dscp-based

   set ip dscp default

   service-policy MPLS_OUT_POLICY

 

 "

getting error

Queueing policy MPLS_OUT_POLICY attached to class with random-detect or queue-limit configured is not supported

% service-policy MPLS_OUT_POLICY of type default is not allowed in policy-map SHAPE of type default

1 Reply 1

Hi,

 what you are trying to do is a 'Hierarchical Traffic Policy'.

 What commands did you put in the 'policy-map MPLS_OUT_POLICY'?

 Note: take a look in the following link.

Hope this helps