06-28-2017 12:32 PM - edited 03-17-2019 10:40 AM
Hello,
I have an 8845 phone that is asking for a QR code. I can't seem to get rid of the screen. I want the phone to register to CUCM. Any thoughts?
Solved! Go to Solution.
06-28-2017 01:01 PM
Seems like it's trying to register to Spark Cloud, that is why you're getting the QR Code.
You must've connected your phone to a port that isn't your voice VLAN, maybe your data VLAN that is opened to the internet.
As Chris stated, you need to have DHCP Options 150 configured for your DHCP scope.
If you have other phones that are working, it must be because they are connected to a port that is configured to be your voice VLAN, and this phone isn't.
06-28-2017 12:42 PM
Do you have proper TFTP DHCP scope 150 defined on the subnet the phone is on? Is the phone getting the TFTP address? Have you tried factory reset?
06-28-2017 01:01 PM
Seems like it's trying to register to Spark Cloud, that is why you're getting the QR Code.
You must've connected your phone to a port that isn't your voice VLAN, maybe your data VLAN that is opened to the internet.
As Chris stated, you need to have DHCP Options 150 configured for your DHCP scope.
If you have other phones that are working, it must be because they are connected to a port that is configured to be your voice VLAN, and this phone isn't.
06-28-2017 05:37 PM
Vlan didn't have access to the voice network. Good catch!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide