Reducing broadcast traffic across flat layer2 VoIP network (SG300-50P switch)?
We have a Cisco SG300-50P small business switch. which is the physical backbone for our VoIP network. Our Cisco CME/CUE router connects to one of the 1GbE ports on the switch, and all the phones are Cisco IP79xx models, connecting to the 10/100 ports (all configured as access ports).
I've noticed that there's a large amount of activity across all the ports on the switch (broadcast traffic?) so my question is why would the network be so noisy with broadcast traffic even when the phones aren't actively passing voice traffic, and what should I be doing to alleviate some of the excessive broadcast traffic that I'm seeing on this network?
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...