11-22-2012 06:55 PM - edited 03-16-2019 02:20 PM
Hi everybody
Please consider the following:
Iphone1------------CME/tftp
CME router has following config:
telephony-service
load 7960-7940 P00308000500
max-ephones 4
max-dn 4
ip source-address 201.201.201.1 port 2000
cnf-file location flash:
max-conferences 4 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1
number 20001
!
!
ephone-dn 2
number 20002
!
!
ephone 1
mac-address 0006.537B.84EF
button 1:1
!
!
!
ephone 2
mac-address 0006.28F0.F7E7
button 1:2
=================================
The cisco ipphone1 i(201.201.201.11) issending CME( 201.201.201.1) following register message.
No. Time Source Destination Protocol Length Info
405 107.462363 201.201.201.11 201.201.201.1 SKINNY 130 RegisterMessage
Frame 405: 130 bytes on wire (1040 bits), 130 bytes captured (1040 bits)
Ethernet II, Src: Cisco_7b:84:ef (00:06:53:7b:84:ef), Dst: Cisco_37:8a:c0 (00:12:d9:37:8a:c0)
Internet Protocol Version 4, Src: 201.201.201.11 (201.201.201.11), Dst: 201.201.201.1 (201.201.201.1)
Transmission Control Protocol, Src Port: 49824 (49824), Dst Port: cisco-sccp (2000), Seq: 105, Ack: 1, Len: 76
Skinny Client Control Protocol
Data length: 68
Header version: Basic (0x00000000)
Message ID: RegisterMessage (0x00000001)
Device name: SEP0006537B84EF
Station user ID: 0
Station instance: 1
IP address: 201.201.201.11 (201.201.201.11)
Device type: TelecasterBus (8)
Max streams: 0
I just want to know if Station instance is 1 because of these commands :
ephone 1
mac-address 0006.537B.84EF
button 1:1
ephone-dn 1
number 20001
thanks and havea great day.
Solved! Go to Solution.
11-23-2012 12:07 AM
Hi Sarah,
This doesnt appear to have anything to do with the ephone or ephone-dn config. I took a pcap for a CIPC and I see
"StationInstance: 0" whereas the ephone tag for this phone is 3. It could possibly be associated with the phone type/model or the skinny load it is running, since this is a register message coming from the endpoint.
http://www.wireshark.org/docs/dfref/s/skinny.html
Field name | Type | Description | Versions |
---|
skinny.stationInstance | Unsigned integer, 4 bytes | Station instance | 1.0.0 to 1.8.3 |
There isnt much documentation on it apparently.
HTH.
Regards,
Harmit.
11-23-2012 12:07 AM
Hi Sarah,
This doesnt appear to have anything to do with the ephone or ephone-dn config. I took a pcap for a CIPC and I see
"StationInstance: 0" whereas the ephone tag for this phone is 3. It could possibly be associated with the phone type/model or the skinny load it is running, since this is a register message coming from the endpoint.
http://www.wireshark.org/docs/dfref/s/skinny.html
Field name | Type | Description | Versions |
---|
skinny.stationInstance | Unsigned integer, 4 bytes | Station instance | 1.0.0 to 1.8.3 |
There isnt much documentation on it apparently.
HTH.
Regards,
Harmit.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: