Registering Cisco 7945G IP Phone on CUCM 6.X Callmanagaer

[peternnaji]

Hello, 

I urgently want to find out how I can register a Cisco 7945G IP Phone on a CUCM 6.0 Callmanager.

I have tried, but did not see the option of 7945G.

If I download the SCCP firmware and upload on the CUCM 6.0 callmanager server, will this work?

Regards, 

Peter.

[Manish Gogna]

Hi Peter,

If you do not see an option to add 7945 on your CUCM version then you need to check the Read me file for the latest device pack for that version ( 6.0.x ) first and if the 7945 IP phone is listed in it then install the device pack on all cucm servers in the cluster followed by a cluster reboot and it will allow you to add 7945. Else, you may upgrade to a 6.1.x version and it will allow you to add 7945.

Manish

- Do rate helpful posts -

[Jaime Valencia]

If your problem is that you do not see a 7945G, but only a 7945, then you don't have any problem, they're the same thing.