cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4670
Views
5
Helpful
6
Replies

Registration Rejected: Max Phones Exceeded On UC 560

esa786_2
Level 1
Level 1

Hi Team

Any Help on this

max phone exceed on UC 560. When i connect new phone. I need urgent help on this.

Thanks

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Esa,

It sounds like a licensing issue to me. How many users is

the system licensed for and at what number of ephones are

you receiving the error?

"show lic detail"

"show platform software lic"

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

View solution in original post

6 Replies 6

Hello,

Under telephony-service you can check with max-ephone how many phones you can add: http://cisco.biz/en/US/docs/voice_ip_comm/cucme/command/reference/cme_m1ht.html#wp1094681

If you can't add more, you need bigger router capable of registering more phones.

Check this link for specifications: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

You can have a look at this post as well:

https://supportforums.cisco.com/thread/2141447

Message was edited by: Hermanus Janse van Vuuren

Best Regards

Sambit Khuas
Level 1
Level 1

Correctly said by Hermanus (+5).

In case the 'max ephone ?' command advises the number of phones you have configured already, then it is likely that we are running into a license issue.

In that case please share the output of 'sh license detail'.

It is possible that we might need to accept the EULA.

Please refer to the following for more information:

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155517

Regards

Sam

Please rate all helpful posts.

Hi

My ephone config is below

max-ephone 114 

max-dn 600

So the max-ephone is not an issue. what will be reason?

pls assist.

It UC560 device.

Rob Huffman
Hall of Fame
Hall of Fame

Hi Esa,

It sounds like a licensing issue to me. How many users is

the system licensed for and at what number of ephones are

you receiving the error?

"show lic detail"

"show platform software lic"

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

Hi Rob,

Thank you for the reply. When i checked the lic command and attached with this post. It looks like, the lic issue. The total lic is 22 and used 22. please give your comment on the attched file.

Thanks in advance Rob

Regards

Esa

      

Rob Huffman
Hall of Fame
Hall of Fame

Hi Esa,

You are most welcome my friend

This does tell the story;

ASG-ASQ01-UC560#show platform software lic

License UDI                  : UC560-T1E1-K9:FGL154112G3

Maximum User Licenses        : 22

Used User Licenses           : 22

Available User Licenses      : 0

As the uc560 has been announced as End of Life you will need to order

an add-on user license quite soon. Something like;

L-UC-PRO-8U=

Software license upgrade, authorizing an additional 8 users (e-delivery)

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/reference_guide_c07-566560.html

End of Life notice;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/end_of_life_notice_c51-729017.pdf

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: