replace Cisco ip phone

[A laban]

i have one client who need to replace almost 1800 phones , he need just distribute the phone and the user just enter his extension. please your support .

[balaji.bandi]

You need to setup new phones for autoprovision with profiles as below example guide suggest you how to do.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/csbpipp/ip_phones/administration/guide/frame_source/500-series-7-5-7/ip_phone_admin/6_prov_basics.pdf

[A laban]

thank you balaji.bandi ,

its not clear.

[balaji.bandi]

you can do as suggested other post, for the self provision.

but if that not what you looking, tell us more ?

[Mohammed al Baqari]

Hi,

Self Provisioning is your solution. Refer to this

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_01101001.html#CUCM_TK_SCC3F493_00

*** Please remember to rate useful posts

[Jaime Valencia]

https://www.unifiedfx.com/products/migrationfx-taps-af

[A laban]

Thank you all , im going with self provision , but i face now one issue can we export and import the universal device profile because i have more than 300 device pool and i need create for each one universal device profile .

Thank you 

[HARIS_HUSSAIN]

Do You mean universal Device Template ? That cannot be exported.
Why Would you create separate Device Template for each Phone . You don't need to. You can simply create few based on the requirements.

If you mean Device Profiles then they can be exported.

**Please rate helpful posts

[A laban]

thank you ,  like what i told we have more than 300 device pool and i need to create for each device pool a universal Device Template  , because every device pool have 100 IP phones