11-08-2010 02:30 PM - edited 03-16-2019 01:48 AM
Is there a IOS 15.X command for the "isdn nsf-service sdn" command which exists in 12.4?
I have 15.1.2T, and it no longer appears as a valid command under interface serial commands
thanks
Solved! Go to Solution.
11-08-2010 07:27 PM
nsf service is supported only for Primary 4ESS switch type
with user side emulation - isdn protocol-emulate user (default)
Make sure that you have isdn switch-type primary-4ess and
DON'T have isdn protocol-emulate network CLI under D-chan/Serial
interface and you shd see following options....
isdn nsf-service sdn
isdn nsf-service megacomm
11-08-2010 05:45 PM
Hi,
The "isdn nsf-service sdn" command needs to be configured under the
Serial/D-channel interface and is only supported for primary 4ESS switch type.
AFAIK it is supported on IOS 15.1.X
Regards,
Tere.
11-08-2010 07:27 PM
nsf service is supported only for Primary 4ESS switch type
with user side emulation - isdn protocol-emulate user (default)
Make sure that you have isdn switch-type primary-4ess and
DON'T have isdn protocol-emulate network CLI under D-chan/Serial
interface and you shd see following options....
isdn nsf-service sdn
isdn nsf-service megacomm
11-09-2010 11:10 AM
Indeed, after setting the switch type, yes, the command is there now. Thanks for all the replies
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide