Replication fails between servers : CUCM 7.1.5.20000-6

[Driss BENATTOU]

Hi,

I had 7 CUCM servers on my cluster. dprelication fails between those servers.

I stop dbreplication on all subscribers and after that the publisher and i reset for all from pub and no change.

When i issue the "utils dbreplication runtimestate", the status hungs on value 0 for subscribers and value 3 on publisher with Setup requested / completd / in Progress message displayed in front of each subscriber server.

I repeated for many times to reset replication but it made ne sense.

Thanks and Best Regards

Driss

[gagansi · Accepted solution]

Hi

Please go through the below mentioned link

https://supportforums.cisco.com/docs/DOC-13672

/Gagan

Please Rate useful Posts.

[dijohn]

Can you pull the CM Database Status from Unified Reporting?

or Open a TAC Case!

[Driss BENATTOU]

Hi,

Problem is resolved.

Below are the steps followed :

• utilis dbreplication stop (all subscribers)
• utils dbreplication stop (publisher)
• utils dbreplication reset (publisher)
• restart publisher (until all services are started)
• restart subscribers (one by one --->  mandatory until all sevices are started)
• check by doing utils dbreplication runtimestate and get value 2 on replicate counter.

Thanks and Best Regards

Driss