02-18-2008 08:32 AM - edited 03-15-2019 08:54 AM
Hi,
Easy one: Can someone advise me how to change the username and password used to access Web Admin Page?
Cheers
Rich
02-18-2008 09:59 AM
Hi Rich,
Here is the method;
From cli;
set password
{admin | security}
The systems prompts you for the old and new passwords.
Note The password must contain at least six characters, and the system checks it for strength.
This command allows you to change the administrator and security passwords.
Command privilege level: 1
Allowed during upgrade: No
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_0_4/iptpappa.html#wpxref47110
The password recovery method is listed here;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_0_4/iptpch2.html
Hope this helps!
Rob
02-18-2008 10:07 AM
To change the web admin pwd in 5.1 and later, use the utils reset_ui_administrator_password command.
The set password command allows one to change the password to access the ipc-platform-cli.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_1_1/iptpappa.html#wp1012330
Regards.
02-20-2008 11:12 PM
there's another way to change the Web Admin Page Password.
After login to the web page with CCMadministrator,go to
UserManagement=>Application User
find the CCMadministrator account and then you can change the password of the account in the configuration page
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide