Restrict CallForward destination on forwarded call

[believ1]

Hi all,

We're deploying a CUCM6.1. Customer has a question with regards to CFwdAll.

Let's say that Phone B has set CFwdAll to his personal Mobile phone MB! If phone A calls phone B, it should be forwarded to the mobile phone MB but phone A should not see the number of phone MB. I've tried to configure a translation pattern and restricted about everything that could be restricted but no luck. Any ideas?

[rcrumm_2]

This should tell you.

Connected Number Display

When a call routes through a translation or route pattern, routes to a Call Forward All or Call Forward Busy destination, or gets redirected through a call transfer or CTI application, the connected number display updates to show the modified number or redirected number.

To turn off phone display updates, so the phone displays only the dialed digits, set the Cisco CallManager service parameter "Always Display Original Dialed Number" to true. When this service parameter specifies true, the originating phone displays only the dialed digits for the duration of the call.

I found it on this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fshosp.html

HTH,

Randall

[believ1]

Hi there Randall,

Great answer!!

Thanks,

Lieven