cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
204
Views
0
Helpful
2
Replies
Shri2
Beginner

Restrict calling presentation for single user

Hi All,

 

What's the best way to restrict the calling presentation for single user in CUCM.

I have read couple of doc's to implement it, I have shared below.

 

1. Create TP with *88 and restrict calling presentation in TP and route it from here.. Ask user to dial *88 before dialing any number.

2. Create separate CSS/partition and assign all route pattern/TP of that site in new partition. Then assign new CSS ( which has new partition ) to phone.

3. Use Calling party transformation pattern CSS on trunk associated with outbound calls.

4. In Cube/gateway, use of rules or SIP profile.

 

Unfortunately our client is not happy with any of the above methods.

Does any one aware of any other method ?

 

2 REPLIES 2
George Sotiropoulos
VIP Collaborator

All the above are interesting solutions but since the customer is not happy...

You may try to manipulate the External Phone Number Mask (to something that is not dialed back XXXX) for this specific phone. A quite interesting description of this can be found here:

 

https://community.cisco.com/t5/collaboration-voice-and-video/how-to-change-the-caller-id-display-from-one-number-to-another/ta-p/3127368

 

Let me know if this works for you,

G

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

User would like to have his calling presentation to be "Private".
Content for Community-Ad

Spotlight Awards 2021