cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
442
Views
5
Helpful
3
Replies

Ring external number simultaneously

MBrooksAirIT
Beginner
Beginner

Running CUCM 6.1.4

Hopefully simple question. We have a customer who wants a DN to ring to an external number simultaneously when dialed. Any suggestions on how this can be accomplished?

Many thanx

3 Replies 3

Jorge Armijo
Enthusiast
Enthusiast

Hi,

You can try with Remote Destinatom Profiles:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsmobmgr.html

This is the link for CUCM 8.5, we have to confirm if it's the same procedure for 6.x ...

For CUCM 6, seems that you can use Mobile Connect:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsmobmgr.html#wpxref99670

--
Jorge Armijo

Sent from Cisco Technical Support Android App

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.

MBrooksAirIT
Beginner
Beginner

Found this article: http://www.tek-tips.com/viewthread.cfm?qid=1575474, so Jorge looks like you may be correct.

If Mobile Connect is the answer, anybody know the operational impact of enabling? Any (real) resource impact?

Hi Michael brooks

Look into that good link that Jorge Armijo sent already (rating +5).

In the section Interactions and Restrictions and System Requirements, there you can find the " impact".

Please remember to rate helpful  responses and identify helpful or correct answers.

Cheers
Bruno Rangel
Please remember to rate helpful responses using the star bellow and identify helpful or correct answers
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers