10-11-2012 07:06 PM - edited 03-16-2019 01:38 PM
Running CUCM 6.1.4
Hopefully simple question. We have a customer who wants a DN to ring to an external number simultaneously when dialed. Any suggestions on how this can be accomplished?
Many thanx
10-11-2012 07:34 PM
Hi,
You can try with Remote Destinatom Profiles:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsmobmgr.html
This is the link for CUCM 8.5, we have to confirm if it's the same procedure for 6.x ...
For CUCM 6, seems that you can use Mobile Connect:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsmobmgr.html#wpxref99670
--
Jorge Armijo
Sent from Cisco Technical Support Android App
10-12-2012 05:30 PM
Found this article: http://www.tek-tips.com/viewthread.cfm?qid=1575474, so Jorge looks like you may be correct.
If Mobile Connect is the answer, anybody know the operational impact of enabling? Any (real) resource impact?
10-12-2012 11:34 PM
Look into that good link that Jorge Armijo sent already (rating +5).
In the section Interactions and Restrictions and System Requirements, there you can find the " impact".
Please remember to rate helpful responses and identify helpful or correct answers.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: