01-10-2012 10:58 AM - edited 03-16-2019 08:55 AM
Hi guys,
Trying to connect nortel 61c to Cisco gateway via t1. Just wondering what the pins should be on the db 15 female side. I know it's 1,2 4,5 on the RJ48 side. Just not sure what these should be mapped to on the db 15 female side. I did google it but want to hear from someone who did this already before letting know the customer.
Thanks a million
Vijay
01-10-2012 01:12 PM
I think the pinout is the same as the old Cisco with DB-15, but to be sure, you should check with Nortel.
01-11-2012 04:32 AM
Hi paolo,
Would you please let me know what that is. I saw some Cisco documentation for that but I can't be sure it that for t1 voice circuit.
Thanks
Vijay
Sent from Cisco Technical Support iPhone App
01-11-2012 04:40 AM
T1 voice or data, makes no difference for pinout.
01-21-2012 05:27 PM
the answer:
DB15 - RJ45
1-1
9-2
3-4
11-5
check the table at the bottom. A-18
http://www.cisco.com/en/US/products/hw/routers/ps332/products_installation_and_configuration_guide_chapter09186a008007e0b6.html
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide