01-08-2009 07:04 PM - last edited on 03-25-2019 07:46 PM by ciscomoderator
We have a Route list with 2 Route groups. each route group contains 1 H323 gateway. If the first Route group is dead, it takes 10 seconds to search to the secndary H323 Route group.
Is there a timer somewhere to shorten this?
Thanks
Solved! Go to Solution.
01-10-2009 10:31 PM
hi
If you shut down the h323 GW the timer you reached is H225 TCP Timer
"H225 TCP Timer : This parameter specifies the preferred H.225 TCP connection timer."
The default is 5 seconds, so I am not sure why it takes 10 sec on your CCM if you have only one GW. If you can upload CCM traces on detailed mode I can tell you if it is doing something else.
Thanks
Pedro
01-10-2009 10:31 PM
hi
If you shut down the h323 GW the timer you reached is H225 TCP Timer
"H225 TCP Timer : This parameter specifies the preferred H.225 TCP connection timer."
The default is 5 seconds, so I am not sure why it takes 10 sec on your CCM if you have only one GW. If you can upload CCM traces on detailed mode I can tell you if it is doing something else.
Thanks
Pedro
01-11-2009 04:32 PM
Thanks Pedro i will try it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide