Route Pattern for SIP SCCP

[Aleksenko Rustam]

Hi guys,

The question is that there is Route Pattern of such look, 9.810!
In it Discard Digits - PreDot is used
At dialing from CIPS 8.6 SCCP 981033XXXXXXXX the call goes to a trunk as 81033XXXXXXXX. - The call goes everything well!
And if to call on CIPS 8.6 SIP 981033XXXXXXXX
the call goes to a trunk as 9810. - And the operator says to me that such number does not exist.
Where can the problem be?

[Aleksenko Rustam · Accepted solution]

The problem was in translation pattern there it was specified 9810X! and no more operations with it were made!