we have connected our Nokia E-Series Phones to our CUCM 6.1 via Sip. Everything
is fine so far. The issue is that the phonenumers in the mobilephone
addressbooks are in an international form e.g. +4901709197... or
+440207..., and I don't know how a route pattern needs to be look like to
match such numbers. In the moment I got the error message "address is
not in use" on the nokia phone, when I try to dial such a number and couldn't see anything in the isdn debug.
We have added one E61 via SCCP to the CUCM 6.1. The problem is nearly the same, but with this phone I got an ISDN debug output, which looks like as the callmanager or gateway just ignores the "+" and dropps it.
The only existing outgoing route pattern we have in the moment is 0.X with activated
Any ideas to make it possible to dial these "+ numbers"??
New Cisco Champion Radio release on Zero Trust for WebexListen: https://smarturl.it/CCRS8E14 Follow us: https://twitter.com/CiscoChampion Cisco introduced End to End (E2E) Encryption in 2008 as a Webex Meeting option where only the me...
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
Learn: How to configure Cloud Connected PSTN with Webex Calling
CCP Provider Name
Product Home Page Link
Webex Calling Region
Countries Supported by Provider
Free Trial Link
Contact Provider Link
FR & LU
Meet the Authors Video - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Tuesday 16th, February 2020 at 10am PST ...
This event had place on Tuesday 16th, February at 9:30am PST
The need for virtual collaboration across individuals, teams, organizations, and industries has been significantly changed with the global challenges presented in 2020. The indust...