Route Pattern for third-party SIP Devices

[s-bruening]

Hi,

we have connected our Nokia E-Series Phones to our CUCM 6.1 via Sip. Everything

is fine so far. The issue is that the phonenumers in the mobilephone

addressbooks are in an international form e.g. +4901709197... or

+440207..., and I don't know how a route pattern needs to be look like to

match such numbers. In the moment I got the error message "address is

not in use" on the nokia phone, when I try to dial such a number and couldn't see anything in the isdn debug.

We have added one E61 via SCCP to the CUCM 6.1. The problem is nearly the same, but with this phone I got an ISDN debug output, which looks like as the callmanager or gateway just ignores the "+" and dropps it.

The only existing outgoing route pattern we have in the moment is 0.X with activated

overlap sending.

Any ideas to make it possible to dial these "+ numbers"??

Regards

[gogasca]

the problem with Intl numbers is the lenght

try Application Dial Rules to see if can help you for some countries...we raised a defect against that and we are working in this

+ since plenty of customers are requesting this feature.

[pasimahone]

Hi,

Is there any specific reason why you want to use SIP?

You could also try Nokia Intellisync Call Connect for Cisco client which enables SCCP to Nokia E-series phones.

Nokia SCCP client converts + sign to 00 by default. So when you make a call e.g. to +49017091197.. the client actually calls to 0049017091197

You can find latest client and documentation from here: http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php

Regards,

Pasi