recently I have been trying to configure a Cisco 7942 and Cisco 7821 to be using the same number.
Either I can configure Cisco 7942 to be using SIP, which I do not know how to, and I have other 7942 in the office using SCCP.
Otherwise, I will have to configure in the ephone-dn for the 7942 phone with the command, "shared-line SIP", and configure voice register dn for the 7821 with the command "shared-line". However, only the 7942 will be ringing, but the 7821 does not ring.
Anyone has the solution to both the problems above?
Hello,FYI, we have posted on our website configuration instructions for integration of the CIsco Unified Border Element (CUBE) with TransNexus ClearIP software.We also have provided a high-level integration overview on our website to explain how the integ...
AI is going to change many tasks and, as a result, many jobs.
In this podcast on artificialintelligence in the workplace, we explore how jobs may change--and what companies can do to keep workers ahead of the shift:
Check out the podcast:...
Join this featured IT Admin Control Hub session where you’ll hear about the improved Meeting diagnostics capability in Control Hub which provides IT Admins richer insights about their meetings, the participants and the quality of service. See metrics to h...