cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
504
Views
0
Helpful
7
Replies
jemima.spare
Beginner

Separate MOH for phones in a device pool

Hello,

Is it possible for a number of devices to have separate music on hold to everyone else?  These devices are in a separate Device Pool.

Call Manager 8

1 ACCEPTED SOLUTION

Accepted Solutions
Jaime Valencia
Hall of Fame Cisco Employee

Don't configure anyone else with that MOH music under any of the 4 levels where MOH music can be configured, in priority:

Line

Device

Common Device Config

Enterprise parameter

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

7 REPLIES 7
Jaime Valencia
Hall of Fame Cisco Employee

Bear in mind that the guy that presses hold, is the one that chooses what you'll hear, the MRGL from the guy who is being put on hold, determines from where he'll get the MOH, with that in mind, what's the exact behavior you want?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Yes, Person A in the Swanky Office presses hold and the caller gets choral music.

I need to know how to get the choral music in the right place so anyone who calls the Swanky Office gets the choral music.

Jaime Valencia
Hall of Fame Cisco Employee

Make sure the MOH server has the MOH file, and is part of the MRGL assigned to the phones that need to hear that music.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

But how do I make sure that only phones in Swanky Office send out choral music and nothing else?

And how do I make sure no-one else in the Plebby offices sends out the choral music?

Thanks

Jaime Valencia
Hall of Fame Cisco Employee

Don't configure anyone else with that MOH music under any of the 4 levels where MOH music can be configured, in priority:

Line

Device

Common Device Config

Enterprise parameter

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

So to clarify;

I can either edit each line or device, which could be very time consuming.

Or I could set up a Common Device Config and apply it to each device.

or I could change the Enterprise parameters and then everyone would get it?

Is that right?

And the MGRL means that there is a choice of music which could be used?

Jaime Valencia
Hall of Fame Cisco Employee

Correct, you configure them and they have that priority.

About MRGL, read here

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmsys/CUCM_BK_C5565591_00_cucm-system-guide-91_chapter_010111.html

HTH


java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Create
Recognize Your Peers
Content for Community-Ad