12-18-2016 04:57 PM - edited 03-17-2019 08:59 AM
My client is proceeding with the SG300-28PP 28-PORT GIGABIT POE+ Managed Switches at over 40 locations. I do not see any support for these switches on the Microsoft Tech site which lists the network infrastructure solutions that have been tested by partners and reviewed by Microsoft.
https://technet.microsoft.com/en-us/office/mt147899
Any ideas on whether these can be programmed to support QoS in a Skype for Business environment? Most users will have a softphone but there will be 40 or so handsets(Polycom VVX) on the network.
Thanks in advance for your help
Cheers
Pete
12-18-2016 05:58 PM
Refer to the config guide:
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
It does look like provides QoS mechanisms to classify\mark\trust the packets but go to QoS section of the guide to check your requirements to be sure.
-Terry
Please rate all helpful posts
12-18-2016 07:38 PM
Hi Terry
Many thanks for the URL to the guide.
I'll pass it on to our engineers.
12-18-2016 07:44 PM
No probs - please do rate helpful posts and dont forget to mark the thread as answered if you have no other queries.
-Terry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: