cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1131
Views
0
Helpful
3
Replies

Shared Line on 9971

aman.kapuria
Level 4
Level 4

Hi Guys,

CME 9 with 9971. Can i have a shared line to an sccp phone?

thanks

3 Replies 3

Leonardo Santana
Spotlight
Spotlight

Hello Aman,

Yes 9971 supports shared line

Take a look on this doc, Calling Features!

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10453/ps10512/data_sheet_c78-565717.html

Rate this if helps you!

Regards!

Regards
Leonardo Santana

*** Rate All Helpful Responses***

sorry was more after the config. below is an example i took from another user on this forum.

voice register dn  1 -. Managers Phone

number 1234

call-forward b2bua busy 1000

call-forward b2bua mailbox 1000

call-forward b2bua noan 1000 timeout 18

shared-line

voice register pool  1

id mac x.x.x.x

type 8961

number 1 dn 1

cor incoming PSTN-INTL default

dtmf-relay rtp-nte sip-notify

username Manager password 1100

codec g711ulaw

voice register dn  2 -. Assistant Phone

number 1235

call-forward b2bua busy 1000

call-forward b2bua mailbox 1000

call-forward b2bua noan 1000 timeout 18

voice register pool  2

id mac x.x.x.x

type 8961

number 1 dn 2

number 2 dn 1

cor incoming PSTN-INTL default

dtmf-relay rtp-nte sip-notify

username Assistant password 1100

codec g711ulaw

I'm trying to create a shared extension between an manager and  assistant. However, I'm only getting the assistant phone to ring while  the manager phone does not show any incoming calls. is there a fix for this?

secondly, i need to add a sip phone as a secondary shared line to a sip phone. will it work and if yes would both phones ring at the same time as desired?

just needed to create fake voice register dns . all good