Shared Line SIP and SCCP, loop call to voicemail

[joseriveros]

Hi,

I Have a CME 9.0 with phones 3905 and IP Communicator in mode shared line, when the IP Communicator is no registered,  the 3905 forward call to voicemail but  this call is loop to peer of IP communicator and no answer the voicemail.

ephone-dn  9  dual-line

number 6004

label Vivian Franco

name Vivian Franco

shared-line sip

call-forward noan 4000 timeout 15

voice register dn  4

number 6004

call-forward b2bua busy 4000 

call-forward b2bua noan 4000 timeout 15

name Vivian Franco

shared-line max-calls 16

label Vivian Franco

mwi

[shabeebmohammed]

Dear Jose,

Did this configuration work for you ??

Im facing a similar problem. My configuration is as below -

voice register pool  1

id mac x.x.x

number 1 dn 6

cor incoming International default

!

voice register dn  6

number 852

allow watch

name Ashwin

shared-line max-calls 16

label Ashwin

!

ephone-dn  12  octo-line

number 852

label Shabeeb CIPC

name Shabeeb CIPC

shared-line sip

!

ephone  1

mac-address x.x.x

type CIPC

button  1:12

!

Its giving me all wierd results. Sometimes only either of the phones rings, the other times nothing rings. Let me know if you have any solutions.

Thanks

Shabeeb