cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
393
Views
5
Helpful
4
Replies

Simultanous ringing on Four different extensions on CME

mrahman0302
Level 1
Level 1

Hi,

My customer wants that when they get call on main number, that should be ringing on 4 different extensions same time. If anybody knows how to do that, could you please share how to do it.

Thanks

4 Replies 4

timurbayazitov
Level 1
Level 1

Hello,

"Parallel Hunt Groups" feature would help you. However, CME 4.3 is required for this. See link below: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1145800

Wilson Samuel
Level 7
Level 7

Hi,

Could you please let us know what version of CME you are using?

Regards

Wilson Samuel

Right now I am using 4.1 but I will upgrade to 4.3 or 7.0.

Thanks.

You can do it with 4.1 using shared lines. However if you expect multiple calls into that DN, there is a special "chained overlay" configuration that you must do,

In CME 7.x you also have octo-lines DN for shared lines that avoid doing the chained/overlay referenced above,

Please remember to rate useful posts with the scrollbox below.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: