03-26-2015 12:03 PM - edited 03-18-2019 11:29 AM
Hi Everyone,
I am wondering if single CUBE router can be used to terminate multiple ITSP SIP trunks.
I will be using multiple authentications under sip-ua.
Thanks
Solved! Go to Solution.
03-27-2015 04:32 AM
You should be able to do that. Refer to below:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/15-mt/sip-config-15-mt-book/voi-sip-multi-trunks.html
The Support for Multiple Registrars on SIP Trunks on a Cisco Unified Border Element, on Cisco IOS SIP TDM Gateways, and on Cisco Unified Communications Manager Express feature allows configuration of multiple registrars on Session Initiation Protocol (SIP) trunks, each simultaneously registered using their respective authentication instance. This feature allows a redundant registrar for each of the SIP trunks, which provides SIP trunk redundancy across multiple service providers.
There is a configuration example as well, look into it and see if it resolves your query.
-Terry
Please rate all helpful posts
03-27-2015 04:32 AM
You should be able to do that. Refer to below:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/15-mt/sip-config-15-mt-book/voi-sip-multi-trunks.html
The Support for Multiple Registrars on SIP Trunks on a Cisco Unified Border Element, on Cisco IOS SIP TDM Gateways, and on Cisco Unified Communications Manager Express feature allows configuration of multiple registrars on Session Initiation Protocol (SIP) trunks, each simultaneously registered using their respective authentication instance. This feature allows a redundant registrar for each of the SIP trunks, which provides SIP trunk redundancy across multiple service providers.
There is a configuration example as well, look into it and see if it resolves your query.
-Terry
Please rate all helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide