08-12-2014 02:24 AM - last edited on 03-25-2019 08:30 PM by ciscomoderator
Hi guys,
I tried to set up the snr with sip uri, at first try, I did not assign partition with sip route pattern and did not assign any CSS on remote desitnation profile. And it worked.
When I tried to assign partition to sip route pattern and CSS (includes the partition assigned to sip route pattern) on remote destination profile. SNR stopped working.
From the log I can see that CUCM knows about the uir for mobility destination but it did not send it to the trunk. Can anyone please have a look and advise? Thanks
Cheers
Jim
08-12-2014 05:58 PM
can anyone have a look at it pls? Thanks
08-12-2014 06:42 PM
I have done two debugs for working and non-working calls.
For the working call:
allowed to call [User1@contractor.home.com]
getLineRingSetting:
retVal=4.getLineRingSetting:
retVal=4.getLineRingSetting:
retVal=4.
for the non-working one:
allowed to call [User1@contractor.home.com]
Can anyone tell me why? Thanks
04-02-2021 05:07 AM
Hello team,
I have the same problem :
"DbMobility IMS Match: no matching ims record exists for remote destination"
I checked the RDP against DNA and the problem is always the same
04-02-2021 11:10 PM
Does the RDP reroute CSS have visibility of the partition where the SIP route patterns are in?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide